Pokémon mini Development Documentation

Chip enable

These values are set to 1 during reset and should not be changed.

A value of 1 enables communication on the CS or LCD_CS pins as chip selects. A value of 0 will disable those signals, causing the cartridge or LCD to not respond to communications.

The exact extent of how these affect the system hasn’t been researched.

CE0

$2000 bit 0 is a R/W interrupt.

Chip Enable for LCD.

In previous documentation, this register was known as “LCD I/O Enable”.

CE1

$2000 bit 1 is a R/W interrupt.

Chip Enable for cartridge.

In previous documentation, this register was known as “Cartridge I/O Enable”.