Don’t mess with this as it could possibly damage the LCD.
LCD_PWR_CTL(x);LCD_CTRL = 0x28 | x;LD LCD_CTRL, #028h | xIn the above, x stores three bit flags 0bBVF:
The docs provide the following table on page 8-32 and warn that other combinations are not recommended:
| Use Settings | D2~D0 | B | V | F | External voltage input | Step-up voltage system terminal |
|---|---|---|---|---|---|---|
| Only the internal power supply is used | 1 1 1 | O | O | O | VSS2 | Used |
| Only the V regulator circuit and the V/F circuit are used | 0 1 1 | X | O | O | VOUT, VSS2 | Open |
| Only the V/F circuit is used | 0 0 1 | X | X | O | V5, VSS2 | Open |
| Only the external power supply is used | 0 0 0 | X | X | X | V1 to V5 | Open |
In the BIOS, this is set to 0b111 when the LCD is initialized and to 0b000 when the LCD is turned off.
It’s very possible that the other modes do nothing or may damage the console. (TODO: real messaging)