Also see here
$2001 bits 3~0 are reserved R/W registers used for storing information related to the BIOS’s multicart. Bit 3 is essentially a flag stating what sort of information is in bits 2~0.
Bit 3 is set as 1 here. It’s reset to 0 during initial boot and during shutdown.
The conditions under which it’s set to 1 are essentially:
These are the same conditions it takes to reach the game select screen, thus this bit is set to 1 when it decides to go to the game select screen.
When a game is selected from the game select menu, the ID is stored in bits 2~0. This is an index into the structure list in ROM.
When the startup action is 2, bit 3 remains 3 and bit 0 is set to 1. This mode essentially has structural information in ROM but it’s opting to automatically boot the first game in that list, instead of showing a select screen.
Bits 2~1 are ignored when bit 3 is 0.
If all bits 3~0 are 0, this is essentially the normal play mode. The cartridge is either not an official flash cart or it’s using startup action 0.